Acer Altos G330 MK2 Bedienungsanleitung PDF herunterladen (Seite 65)

To install memory module:

1 Perform steps 1 through 3 of the previous section.

2 Select an empty DIMM slot.

3 If necessary, open the holding clips of the selected DIMM slot.

4 Remove the new memory module from its protective packaging,

handling it by the edges.

5 Install the new memory module.

(1) Align the module so that the notch on the slot fits the keyed

edge of the module, then press the module at both ends until

the retaining clips snap into place.

If you insert a module but it does not fit easily into the slot,

you have inserted it incorrectly. Reverse the orientation of the

module and insert it again.

(2) Make sure to firmly press the retaining clips inward to lock the

module in place.

If the holding clips do not close, the module is not properly

inserted.

6 Observe the post-installation instructions described on page 30.

The system automatically detects the amount of memory installed.

Run the BIOS setup utility to view the new value for total system

memory.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 124 125

Keine Kommentare

Acer Altos G330 MK2 Bedienungsanleitung Seite 65