Acer Altos G330 MK2 Bedienungsanleitung PDF herunterladen (Seite 69)

Installing the BMC module

The optional BMC module allows system administrators to manage the

Altos G330 Mk2 system remotely over a network.

To install the BMC module:

1 Perform the pre-installation instructions described on page 30.

2 Locate the IPMI_1 slot. If necessary, remove any boards or cables

that prevent access to it.

3 If necessary, open the holding clips of the IPMI_1 slot.

4 Remove the BMC module from its protective packaging, handling

it by the edges.

5 Install the BMC module.

(1) Align the module so that the notch on the IPMI_1 slot fits the

keyed edge of the module, then press the module at both

ends to seat it fully into the slot.

When the module is properly installed, the holding clips will

automatically lock in place.

(2) Secure the module with the one screw.

6 Observe the post-installation instructions described on page 30.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 124 125

Keine Kommentare

Acer Altos G330 MK2 Bedienungsanleitung Seite 69