Acer Aspire M5802 Technical Information PDF herunterladen (Seite 94)

Chapter 7 86

Step 7:Select "RAID5(Parity)" at "RAID Level".

Picture7

Step 8:You can select the "Strip Size" and define RAID capacity in "Capactity".

Step 9:Press "Create Volume" to create RAID5,it will pop the warning message that all data will be lost,"press

"Y" to confirm it.

Step 10:It will back to create RAID interface,then press "ESC" or select 4 to exit and install OS.

1-4: Create SATA RAID 0+1

Step 1:Shut down the EUT, unplug the power cable,connect four SATA HDDS to EUT , check the EUT all

devices are connect/plug ok.

Step 2:Press "PWR-BTTN" to power on the EUT,Load BIOS default setting .

Step 3:At "Integrated_Peripherals" page "OnChip SATA Type" item set is as "RAID" mode,save and exit.

Step 4:During BIOS post, press <Ctrl-I> to enter into Intel RAID setup utility.

Step 5: Select "1" to enter create RAID mode ,if there is no enough avalable space (there was exist a Raid ,

delete it ).

Step 6:Create RAID 0+1 Mode,firstly create RAID 0 Mode,enter the RAID name,such as "MyRaid0+1",default

is"Volume0".

Step 7:Select "RAID0(Stripe)" at "RAID Level".

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 104 105

Keine Kommentare

Acer Aspire M5802 Technical Information Seite 94