Acer Power SP Technical Information PDF herunterladen (Seite 62)

56 Chapter 4

Diskette drive read/write error. 1. Diskette.

2. Ensure the diskette drive is not set to Write protect in the

Security Options of BIOS Setup.

3. Diskette drive cable.

4. Diskette drive.

5. System board.

Diskette drive LED comes on for more than 2

minutes when reading data.

1. Diskette

2. Diskette drive connection/cable

3. Diskette drive

4. System board

Diskette drive LED fails to light, and the drive

is unable to access for more than 2 minutes.

1. Diskette

2. Diskette drive power

3. Diskette drive connection/cable

4. Diskette drive

5. System board

Diskette drive test failed. 1. Diskette

2. Diskette drive

3. Diskette drive cable

4. System board

Hard Disk Drive

NOTE: Ensure hard disk drive is configured correctly in BIOS Setup, cable/jumper are set correctly

before diagnosing any hard disk drive problems.

Hard disk drive test failed. 1. Enter BIOS Setup and Load default settings.

2. Hard disk drive cable.

3. Hard disk drive.

4. System board.

Hard disk drive cannot format completely. 1. Enter BIOS Setup and Load default settings.

2. Hard disk drive cable.

3. Hard disk drive.

4. System board.

Hard disk drive has write error. 1. Enter BIOS Setup and Load default settings.

2. Hard disk drive.

Hard disk drive LED fails to light, but system

operates normally.

1. With the system power on, measure the voltage of hard disk LED

connector.

2. Hard drive LED cable.

CD/DVD-ROM Drive

NOTE: Ensure CD/DVD-ROM drive is configured correctly in BIOS Setup, cable/jumper are set

correctly and its laser beam is clean before diagnosing any CD/DVD-ROM drive problems.

CD/DVD-ROM drive LED doesn't come on

but works normally.

1. CD/DVD-ROM drive

CD/DVD-ROM drive LED flashes for more

than 30 seconds before LED shutting off.

Software asks to reinstall disc.

Software displays a reading CD/DVD error.

1. CD/DVD-ROM may have dirt or foreign material on it. Check with

a known good disc.

2. CD/DVD-ROM is not inserted properly.

3. CD/DVD-ROM is damaged.

CD/DVD-ROM drive cannot load or eject

when the system is turned on and its eject

button is pressed and held.

1. Disconnect all cables from CD/DVD-ROM drive except power

cable, then press eject button to try to unload the disk.

2. CD/DVD-ROM drive power.

3. CD/DVD-ROM drive

CD/DVD-ROM drive does not read and there

are no messages are displayed.

1. CD may have dirt or foreign material on it. Check with a known

good disc.

2. Ensure the CD/DVD-ROM driver is installed properly.

3. CD/DVD-ROM drive.

Error Symptom Action/FRU

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Acer Power SP Technical Information Seite 62

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server / Workstation-Motherboards Acer Power SP