Acer SmartRAID V Bedienungsanleitung Seite 106

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 256
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 105
5-22
Software Installation
NetWare 5.0 – Boot Controller
Use the following procedure to install support for a SmartRAID VI
controller during installation of NetWare 5. The controller should be
installed at the beginning of the procedure so that it can be detected by the
install routine.
1. Install the DPT controller as the primary controller and attach the
disk drives. You can use SMOR to create disk arrays or Hot Spare
drives when you boot the system.
2. Install and configure a secondary controller (non-I2O SCSI or IDE)
for the CD-ROM drive and any other storage devices such as a tape
drive.
3. Create a directory on the C: drive named NWUPDATE.
4. Insert the DPT NetWare diskette into the floppy disk drive.
5. Copy A:\NW5 to C:\NWUPDATE.
6. Start the NetWare installation program from the CD-ROM. Use the
Custom Installation option.
7. On the Server Drivers - Summary menu, highlight Disk and CDROM
Drivers and press Enter.
When prompted choose I2OPCI.NLM and BKSTROSM.HAM as disk
drivers.
8. Complete the NetWare installation according to the Novell
documentation.
Verify that I2OPCI.NLM is listed after BKSTROSM.HAM in your
STARTUP.NCF file.
9. Install the latest support pack for NetWare 5.0.
NOTE Installing a NetWare Support Pack will overwrite the I
2
O
drivers supplied by DPT. If you encounter problems after
installing the Support Pack, you can restore the DPT files by
copying them from the DPT NetWare diskette.
Seitenansicht 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 255 256

Kommentare zu diesen Handbüchern

Keine Kommentare