Acer SmartRAID V Bedienungsanleitung PDF herunterladen (Seite 133)

6-21

Storage Manager

The Array Group Information window displays the following information:

Name

The descriptive name assigned to the array. An icon in the

upper right corner of the window indicates the RAID level.

Address

This is the logical device address used by the host

operating system to access the logical drive. The address

is the same one as the lowest device address disk drive in

the array.

Capacity

The total usable storage capacity of the array in

megabytes (MB).

Status

The current status of the array as reported by the

controller.

Hotspares

Displays a list of any Hot Spare drives that are available

to protect the array in the event of a drive failure.

Components

Displays the logical address, model and stripe size for

each member of the array. If this a Parity Group

information window, the list displays the address or name

and stripe size for each disk array that is a member of the

parity group.

NOTE The availability of the various buttons depends on the current

configuration and state of the array.

Buttons include Configure, Print, Event Log, I/O Stats, Verify/Fix and Name.

A Rebuild button will appear for redundant arrays that have a failed drive.

For arrays that are building or rebuilding, a Stop Bld button is displayed.

For arrays that have a build pending, a Build button is displayed.

Arrays running Verification will have Stop Vfy button.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 255 256

Keine Kommentare

Acer SmartRAID V Bedienungsanleitung Seite 133