Acer SmartRAID V Bedienungsanleitung Seite 77

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 256
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 76
4-21
SMOR
b. To remove a previously selected device from the array, highlight
the device and press the Spacebar.
4. When you are finished selecting drives for the new array, select
Done.
5. If you are creating a RAID 1 array, the RAID-1 Build Option dialog
appears.
RAID 1 arrays are built by copying the existing data from one
device to the other. Select the direction for the copy, then select OK.
6. Select File–Set System Config to start the build process. The array
you have created will begin building at this time. If you have created
multiple arrays, they are built serially in the order they were
defined.
Alternatively, you can exit SMOR. You will be prompted to save the
configuration changes. If you choose to save the configuration and
have defined arrays, the build process will begin.
For large redundant arrays, the build process can take several hours to
complete. You can exit SMOR and perform other activities on the system
while the build continues. An array being built can be accessed during the
build process.
If you exit SMOR and you want to monitor the progress of the build
operation, you can use the Array Group Information window for the array
in Storage Manger. See Chapter 6, Storage Manager for additional
information.
Seitenansicht 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 255 256

Kommentare zu diesen Handbüchern

Keine Kommentare