Acer SmartRAID V Bedienungsanleitung Seite 90

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 256
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 89
5-6
Software Installation
Adding to an Existing System
(Microsoft OSM)
NOTE If you use the Microsoft I
2
O OSM in place of the DPT miniport
driver, you will not be able to run Storage Manager.
To add a DPT SmartRAID V controller to an existing Windows NT 4.0
system using the Microsoft Windows NT OSM, do the following:
1. Obtain a copy of the self-extracting file for the Microsoft I
2
O drivers
and extract the drivers to a directory or diskette.
2. From Control Panel, select the SCSI Adapters icon. Then select the
Drivers tab and click Add.
3. When the Install Driver dialog box appears, select Have Disk.
4. Insert the Microsoft Windows NT OSM I
2
O driver diskette or type
the path to the directory to which you unzipped the driver files.
5. Select Microsoft I20 Drivers.
6. After the driver is loaded, shut down the system. Add the new DPT
SmartRAID V controller to the system, leaving the existing
controller installed.
7. Boot the system.
The Microsoft I
2
O OSM driver supports only disk drives. If you want
CD-ROM, tape, scanner, or other SCSI device support on your
SmartRAID V controller under Windows NT, you must to use the DPT
Windows NT 4.0 miniport driver.
Additionally, the Microsoft I
2
O OSM driver for Windows NT does not
inherently support bootable controllers. If you want to boot the
SmartRAID V controller with the Microsoft I
2
O OSM, do the following:
1. Install Windows NT 4.0 with the DPT Windows NT 4.0 miniport
driver.
2. After Windows NT is installed, remove the DPT Windows NT 4.0
miniport driver from the SCSI Adapters list.
3. Install the Microsoft Windows NT OSM I
2
O driver. The I
2
O BIOS
ROM on the SmartRAID V controller will manage the Windows NT
4.0 boot process up to the point where the Microsoft I
2
O OSM loads.
Seitenansicht 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 255 256

Kommentare zu diesen Handbüchern

Keine Kommentare