Acer Extensa E464 Bedienungshandbuch PDF herunterladen (Seite 21)

English

Post-installation instructions

Observe the following after installing a computer component:

1 See to it that the components are installed according to the step-

by-step instructions in their respective sections.

2 Replace any expansion boards or peripherals that you removed

earlier.

3 Replace the side panels.

4 Connect the necessary cables and turn on your computer.

Opening your computer

Caution: Before you proceed, make sure that you have turned off

your computer and all peripherals connected to it. Read the

"Preinstallation instructions" on page 10.

You need to open your computer before you can install additional

components. See the following section for instructions.

To remove the computer cover

1 Turn off your computer and unplug all cables.

2 Place your computer on a flat, steady surface. If your computer is

in the vertical position, remove the foot stands and place your

computer in the regular desktop position.

3 Turn the screws counterclockwise to release the cover.

4 Hold the sides of the cover with both hands.

5 Slide it back about an inch and then gently lift it upward to detach

it.

To replace the computer cover

1 Align the cover’s hinges to the housing frame; then gently push it

in to slide it back into place.

2 Secure the cover with the screws.

Upgrading your computer

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 38 39

Keine Kommentare

Acer Extensa E464 Bedienungshandbuch Seite 21