Acer Veriton X4618G Bedienungshandbuch PDF herunterladen (Seite 21)

English

2 Replace any expansion boards or peripherals that you removed earlier.

3 Replace the side panels.

4 Connect the necessary cables and turn on your computer.

Opening your computer

Caution: Before you proceed, make sure that you have turned off

your computer and all peripherals connected to it. Read the

"Preinstallation instructions" on page 10.

You need to open your computer before you can install additional components.

See the following section for instructions.

To remove the computer cover

1 Turn off your computer and unplug all cables.

2 Place your computer on a flat, steady surface. If your computer is in the

vertical position, rotate the plastic stabilizers and lay your computer on its

side.

3 Turn the screws counterclockwise to release the cover.

4 Hold the sides of the cover with both hands.

5 Slide it back about an inch and then gently lift it upward to detach it.

To replace the computer cover

1 Align the cover's hinges to the housing frame; then gently push it in to

slide it back into place.

2 Secure the cover with the screws.

Upgrading your computer

Certain components of your computer are upgradeable, such as the memory,

the hard disk, the CPU and the expansion cards. You need to observe the

"Installation precautions" on page 10 when installing or removing a computer

component. However, for safety purposes, we do not recommend that you

perform these upgrades yourself. If you want to replace or upgrade any of

these components, contact your dealer or a qualified service technician for

assistance.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Keine Kommentare

Acer Veriton X4618G Bedienungshandbuch Seite 21