Acer ISDN 128 Surf USB Bedienungsanleitung Seite 31

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 37
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 30
; and the line is considered up. "Ring" means we wait until the ring cadence
; occurs at least once. "Answer" means we wait until the other end picks up.
;
;mode=answer
mode=ring
;mode=immediate
;
; List all devices we can use.
;dtmfmode=asterisk ; Detect using Asterisk
dtmfmode=asterisk/both ; Detect using Asterisk, generate w/ both
; two other devices, which are in group '1' and are used when an
; outgoing dial used: exten => s,1,Dial,Modem/g1:1234|60|r
; (we do not need more outgoing devices, since ISDN2 has only 2 channels.)
; Lines can be in more than one group (1-31); comma separated list.
;
group=1 ; group=1,2,3,9-12
msn=6130578,6130579,6130580
outgoingmsn=6130578
device => /dev/ttyI0
Tab. 19 -Modem.conf with defined ISDN device like ttyI0
6.5.2 Config of SIP clients accounts
Now we have to define accounts for Sip phone clients in sip config file in our PBX. We
know that configuration file for sip clients name sip.conf. In this file we fill the bind
address and SIP proxy port too.
[general]
context=default ; Default context for incoming calls
; defaults to "asterisk"
; Set this to your host name or domain name
port=5060 ; UDP Port to bind to (SIP standard port is 5060)
bindaddr=161.53.64.15 ; IP address to bind to (0.0.0.0 binds to all)
Tab. 20 - General field in sip.conf
Every SIP client have self account with specification of name, callerid, host and
codec. The host can be with dynamic or with static IP address, We allow 3 codec: iLBC,
GSM and G.711a.
[xlite1] ;static client
type=friend
username=xlite1
secret=xlite1
callerid="2101 xlite1" <2101>
host=161.53.64.236
;nat=yes ; xLite is behind a NAT router
canreinvite=no ; Typically set to NO if behind NAT
defaultip=161.53.64.236
disallow=all
allow=gsm ; GSM consumes far less bandwidth than ulaw
;allow=ulaw
allow=alaw
allow=iLBC
[xlite2] ; xlite2-10 dynamic clients
type=friend
username=xlite2
Seitenansicht 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare