Acer ARMC Bedienungsanleitung PDF herunterladen (Seite 16)

Acer Remote Management Card (ARMC) User’s Guide

Step 1 Unpack the ARMC Management Board (and check jumper settings),

Continued

JP6 Diagnostic and Recovery Mode Jumper

This jumper is primarily used to recover a failed flash attempt. By shorting pins one and

two, you can place your ARMC card into Diagnostics Mode. By shorting pins two and

three, you can place your ARMC card into Recovery Mode. See Appendix D,

WinFlash.exe for more information on how to recover your ARMC card. By default, pins

one, two and three are open.

Pin Description

1 GP I/O PA7

2 Ground

3 GP I/O PA10

Step 2 Install the Optional Battery and Battery Clip

The ARMC on-board battery backup is an optional component. When the optional

battery is installed, your ARMC card can stay powered on for 28 minutes without any

external power from the host system or AC adapter.

Installation

To install the Battery Backup Unit, plug the battery cable into the J1 connector and place

the battery pack in between the three mounting holes. Next, align and snap the plastic

battery clip into the three mounting holes over the battery pack. See the diagram on the

right.

Align and snap

the battery clip

into the three

mounting holes

on top side of

the PCB over the

battery backup

unit

Place the battery

in between the three

mouniting holes

Plug the battery cable

into the J1 connector

Cont’d

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 172 173

Keine Kommentare

Acer ARMC Bedienungsanleitung Seite 16