Acer X1270 Betriebsanweisung PDF herunterladen (Seite 52)

English

To Change the Lamp

1 Turn off the projector by pressing the power button.

2 Allow the projector at least 30 mins to cool down.

3 Disconnect the power cord.

4 Open the screw cover on the right side of the projector. (Illustration #1)

5 Remove the screw on the right side of the projector. (Illustration #2)

6 Push and slide the top cover (Illustration #3) and then open the top cover.

(Illustration #4)

7 Remove the two screws that secure the lamp module (Illustration #5) and

pull up the lamp bar. (Illustration #6)

8 Pull out the lamp module by force. (Illustration #7)

To replace the lamp module, reverse the previous step.

Warning: To reduce the risk of personal injury, do not drop the

lamp module or touch the lamp bulb. The bulb may shatter and

cause injury if it is dropped.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 65 66

Keine Kommentare

Acer X1270 Betriebsanweisung Seite 52