Acer P238HL Bedienungsanleitung PDF herunterladen (Seite 19)

English

Installation

To install the monitor on your host system, please follow the steps below:

Steps

1 Connect the video cable

a Make sure both the monitor and computer are switched off.

b Connect the VGA video cable to the computer.

c Connect the digital cable

(1) Make sure both the monitor and computer are switched off.

(2) DVI Cable (Optional, only Dual-Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the DVI cable to the computer.

(3) HDMI Cable (Optional, only HDMI-Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the HDMI cable to the computer.

2 Connect the audio cable (Optional, only Audio-Input Model)

a Connect an earphone to the audio port of the monitor.

Note: Audio output is only available when the input signal is HDMI.

3 Connect the adapter

a Connect the AC cord to the adapter.

b Connect one end of the adapter to the monitor and the other end to a properly

grounded, AC outlet.

4 Turn on the monitor and computer

Turn on the monitor first, then the computer. This sequence is very important.

5 If the monitor does not function properly, please refer to the troubleshooting section

to diagnose the problem.

DVI-D

HDMI

AUDIO

D-SUB

AUDIO

DC INVGA IN AUDIO INHDMI 1 HDMI 2

DVI-D IN

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Keine Kommentare

Acer P238HL Bedienungsanleitung Seite 19