Acer Altos R380 F3 Bedienungsanleitung PDF herunterladen (Seite 52)

Altos R380 F3 Installation Configuration Guide

2. Select New Configuration

3. Select Yes to continue. An array selection window displays the devices connected

to the current controller.

4. Press the arrow keys to choose specific physical drives and press SPACE key to

associate the selected drive with the current array. The indicator for selected

drive change from READY to ONLINE

5. After adding 2 drives to current array, press Enter to finish creating current array.

6. Press Enter again to select array to configure.

7. Press SPACE key to select the array and press F10 to configure the logical drive.

8. The default RAID level for 2 disk drives is RAID1. Just select Accept to use the

default setting.

9. Press Enter to return to the ARRAY SELECTION MENU.

10. Press Enter to end the array configuration.

11. Select Yes to Save Configuration and press any key to return to the Configure

menu.

Initializing a RAID Volume

1. Press Esc to return to the Management Menu.

2. Select Initialize from Management menu. All logical drives should be listed

under Logical Drives.

3. Press SPACE key to select drives for initialization. The selected drive will be

shown in yellow.

4. Press F10.

5. Select YES to start the initialization process.

6. When initialization is complete, press any Esc to continue.

7. Press Esc again to return to the Management Menu.

Assigning a Hot Spare Drive

1. Select Objects from Management menu.

2. Select Physical Drive from Objects. All of the drives will be listed.

3. Select a drive marked as READY and press Enter.

4. Select Make Hot Spare and press Enter.

5. Select Yes then you will see the HDD is changed from READY to HOTSP.

6. Press Esc to return to the Management Menu.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58

Keine Kommentare

Acer Altos R380 F3 Bedienungsanleitung Seite 52