Acer G540 Bedienungsanleitung PDF herunterladen (Seite 126)

Appendix A: Server management tools

116

LSI 1068 SAS Configuration Utility

This section explains how to create a RAID 1 volume when the LSI 1068

SAS controller board is installed.

To initialize the LSI Logic Config Utility:

1 Turn on the server and the monitor.

If the server is already turned on, close all open applications, then

restart the server.

2 During POST, press Ctrl-C on the SAS BIOS prompt.

To load the factory default RAID setting:

1 On the LSI Logic Config Utility, press Alt-N to display Global

Properties.

2Select Restore Defaults, then press Enter.

3 Press Esc, then select Save changes then exit this menu.

4Select SAS1068, then press Enter.

5Select Advanced Adapter Properties, then press Enter.

6Select Restore Defaults, then press Enter.

7 Press Esc twice, then select Save changes then exit this menu.

To create a RAID 1 volume with a hot spare disk:

1 On the LSI Logic Config Utility, click SAS1068, then press Enter.

2Select RAID Properties, then press Enter.

3Select Create IM Volume, then press Enter.

4 Move the cursor to the RAID Disk

column.

5 Press the space bar to change the setting from No to Yes.

The Drive Status will be marked as Primary

6 Move the cursor to another disk.

7 Press the space bar to change the setting from No to Yes.

The Drive Status will be marked as Secondary

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 145 146

Keine Kommentare

Acer G540 Bedienungsanleitung Seite 126