Acer G7710 Bedienungsanleitung PDF herunterladen (Seite 74)

6 Upgrading your computer62

English

Installing an expansion card

This section explains how to install an expansion card and a second CrossFire-

Ready graphic card.

PCI bus slots interface

3 PCI Express x16 slots compatible with PCIE 2.0 specification, supports CrossFire

mode.

• The mazarine PCIE x16 (PCI_EX1, 3, 5) slot supports PCIE x16 speed

• The blue PCIE x16 (PCI_EX2, 4) slot supports PCIE x8 speed

• If you intend to install three expansion cards into PCIE x16 slots, these two

PCIE x16 lanes will auto arrange from x16/ x0 to x8/ x8

• If you intend to install only one expansion card, make sure thatthe

expansion card is installed on the mazarine PCIE x16 slot(PCI_EX1)

To install an expansion card:

1 Perform the preinstallation instructions described on page 48.

2 If necessary, remove any cables that prevent access to the processor

sockets.

3 Locate an empty expansion slot that is compatible with the specification of

the card you intend to install.

4 Press the release latch of the slot cover opposite the selected expansion

slot.

5 Pull out the slot cover and store it for reassembly later.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 101 102

Keine Kommentare

Acer G7710 Bedienungsanleitung Seite 74