Acer Altos G710 Bedienungsanleitung PDF herunterladen (Seite 77)

Installing the Altos RAID-enabler

(optional)

This section explains how to install the Altos RAID-enabler (iButton)

and an iTBBU.

The iTBBU (Transportable Battery Backup Unit) shown below is for your

reference only. You have the option to install either an iTBBU or an

unbuffered ECC DDR DIMM into the DIMM slot.

Note: The Altos RAID-enabler (iButton) is not included with your

system. To purchase an Altos RAID-enabler (iButton) and iTBBU,

contact your local Acer representative or order directly from http:/

/www.acer.com/.

The Altos RAID-enabler (iButton) works in association with the DDR

DIMM or iTBBU to subsequently store data from the HDD to the DIMM.

iTBBU includes a battery pack attached onto the memory module that

protects data in the cache memory in the event of a power failure.

1 Observe the ESD precautions and pre-installation procedures

described on page 39.

2 Install the Altos RAID-enabler (iButton) and the iTBBU by

following the steps below:

(1) Open the clips on the socket.

(2) Align then insert the iTBBU into the DIMM slot (1).

(3) Press the holding clips inward to lock the iTBBU in place (2).

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 197 198

Keine Kommentare

Acer Altos G710 Bedienungsanleitung Seite 77