Acer 1400 Series Bedienungsanleitung PDF herunterladen (Seite 77)

English

Englis

Frequently asked questions

This section suggests solutions to commonly encountered problems.

I press the power switch, but my computer does not start or boot-up.

Look at the Power status indicator:

• If it is not lit, no power is being delivered to the computer. Check

the following:

- If you are running on battery power, the battery may be low

and unable to power the computer. Connect the AC adapter

to recharge the battery pack.

- If you are running on mains power, make sure that the AC

adapter is properly plugged in to the computer and to the

power outlet.

• If it is lit, check the following:

- Make sure that there is not a non-bootable (non-system)

diskette in the floppy disk drive. If so, remove the diskette or

replace it with a system diskette, and then press Ctrl-Alt-Del to

restart the system.

- The operating system files may be damaged or missing. Insert

the Windows startup disk, and then press Ctrl-Alt-Del to

restart the system. Windows will diagnose your system and

make necessary fixes.

Nothing appears on the screen.

The computer's power management system automatically blanks the

screen to save power. Press any key to turn the display back on.

If pressing a key does not turn the display back on, check the

following:

• The brightness level might be too low. Press Fn + F2 hot key to

increase the screen brightness level.

• The display device might be set to an external monitor. Press the

Fn + F5 hot key to toggle the display setting.

• The system may be in standby mode. Try pressing the power switch

to resume.

The image is not full-screen.

Make sure that the resolution is set to a resolution your system

supports:

• Right click on your Windows desktop and select Properties to bring

Bt2421`F/cppl!!Qbhf!78!!Npoebz-!Nbsdi!42-!3114!!5;48!QN

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 99 100

Keine Kommentare

Acer 1400 Series Bedienungsanleitung Seite 77