Acer S1213Hne Betriebsanweisung PDF herunterladen (Seite 37)

English

About Acer SmartPen Setting

Note 1: Preparations

1. Connect the projector and your computer with a USB cable and VGA cable.

2. Turn on your projector and make sure it is displaying the computer’s

image.

3. Plug the PB dongle to the PB dongle slot on the side of the projector.

4. Enable the pen by selecting "On" in the Setting > SmartPen > Pen Function

menu. The pen’s link light starts to blink.

5. Point the pen at the screen to point, click, and drag.

Note 2: Overview of the Acer SmartPen

Note 3: Charging the battery

1. To charge the battery, open the flap on the back of the pen to expose the

USB connector.

2. Take a USB cable, and connect the smaller end to the pen and the larger

end to a computer. Make sure the computer is powered on.

3. The battery light stays on while the battery is charging. When charging is

finished, the battery light is off. You can disconnect the USB cable or keep

it connected.

Nib

Power switch

Right mouse button

Left mouse button

Link light

USB connector

Information key

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Keine Kommentare

Acer S1213Hne Betriebsanweisung Seite 37