Acer 500L Bedienungsanleitung PDF herunterladen (Seite 57)

Chapter 3 BIOS Utility 3-11

LS-120 Drive Compatible As

This parameter allows you not only to enable the LS-120 device

installed in your system, but also to specify the function of the device.

The setting affects how BIOS will detect the device.

Possible settings are:

•

Normal

In this setting, BIOS does not support the LS-120

drive. The drive needs the LS-120 device driver to operate.

•

Drive A

BIOS recognizes the LS-120 drive as drive A. If a

standard diskette drive A exists, BIOS automatically identifies it

as drive B. If a standard diskette drive B exists, it automatically

becomes inaccessible.

If two LS-120 drives exist, BIOS recognizes them as drive A and

drive B, respectively.

•

Drive B

BIOS recognizes the LS-120 drive as drive B. If a

standard diskette drive B exists, it becomes inaccessible.

•

Hard Disk

BIOS recognizes the LS-120 drive as a hard disk.

In this setting, format the LS-120 drive as any other hard disk and

assign it a drive letter C, D, E, and so on. See the documentation

that came with the LS-120 drive for more information.

IDE Drives

To configure the IDE drives connected to your system, select the

parameter that represents the channel and port where the desired

hard disk to configure is connected. The options are:

IDE Primary Channel Master

This parameter lets you configure the hard disk drive connected to the

master port of IDE channel 1.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 90 91

Keine Kommentare

Acer 500L Bedienungsanleitung Seite 57