Acer 500L Bedienungsanleitung PDF herunterladen (Seite 71)

Chapter 3 BIOS Utility 3-25

Num Lock After Boot

This parameter allows you to activate the Num Lock function upon

booting. The default setting is

Enabled

Memory Test

When set to

Enabled

, this parameter allows the system to perform a

RAM test during the POST routine. When set to

Disabled

, the

system detects only the memory size and bypasses the test routine.

The default setting is

Enabled.

Configuration Table

This parameter allows you to enable or disable the appearance of the

configuration table after POST but before booting. The configuration

table gives a summary of the hardware devices and settings that BIOS

detected during POST.

Boot from LANDesk Service Agent

When set to

Enabled

, the system boots from a LANDesk Service

Agent network instead of your desktop system. The LANDesk Service

Agent is IEEE-standards-based code that intervenes in the boot

process. Please refer to your LANDesk Manual for more information.

When set to

Disabled

, the system boots from the drive specified in

the Boot Sequence parameter.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 90 91

Keine Kommentare

Acer 500L Bedienungsanleitung Seite 71