Acer 2100 Bedienungsanleitung PDF herunterladen (Seite 81)

Chapter 3 - BIOS Utility 3-29

2. Open the system housing and set switch no. 2 of SW1 to Off to bypass the password

function.

3. Turn on the system and enter the BIOS utility. This time, the system does not require

you to type in a password.

You can either change the existing Setup

password or remove it by selecting None. Refer

to the previous section for the procedure.

3.9.2 Power-on Password

The Power-on Password secures your system against unauthorized use. Once you set this

password, you have to type it whenever you boot the system. To set this password, enter

the BIOS utility, select System Security, then highlight the Power-on Password parameter.

Follow the same procedure as in setting the Setup password.

Make sure switch no. 2 of SW1 is set Off to enable

the Power-on password.

Operation Mode

This function lets you enable or disable the password prompt display. When set to

Normal, the password prompt appears before system boot. When set to Keyboard

Lock, the password prompt does not appear; however, your system will not respond to

any keyboard or mouse input until you enter the correct password.

The default setting is Normal.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 114 115

Keine Kommentare

Acer 2100 Bedienungsanleitung Seite 81