Acer Note Nuovo Bedienungsanleitung PDF herunterladen (Seite 144)

Troubleshooting 8-3

I prefer using an external keyboard and mouse, but both have PS/2

connectors and there is only one PS/2 port on the notebook. How

do I connect them to the notebook at the same time?

A: To connect two PS/2-type devices to the notebook, you need to use a

PS/2 Y-bridge cable. See

PS/2 Y-Bridge Cable

in section 4.8.2 for

details.

Connecting two PS/2-type devices via the mini dock is not a problem,

because there are separate PS/2 connectors for an external keyboard

and mouse.

I opened the display but the notebook does not start or boot-up.

A: Look at the power indicator (

) on the display panel.

If the indicator is not lit, no power is being applied to the notebook.

Check the following:

• If you are running on battery power, it may be low and unable to

power the notebook. Connect the AC adapter to recharge the

battery pack.

• Make sure the AC adapter is plugged in properly to the notebook

and to the power outlet.

If the indicator is lit, check the following:

• Is a non-bootable (non-system) diskette in the floppy drive?

Remove or replace it with a system diskette and press

to restart the system.

• The operating system files may be damaged or missing. Insert the

startup disk you created during Windows 95 setup (see section

1.4) into the floppy drive and press

to restart the

system. This will diagnose your system and make necessary fixes.

If you still cannot access your hard disk or start-up Windows 95

after the diagnosis, you may need to use the notebook backup disk

to restore your hard disk to its initial state. See the backup kit for

details.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 156 157

Keine Kommentare

Acer Note Nuovo Bedienungsanleitung Seite 144