Acer PD726 Bedienungsanleitung PDF herunterladen (Seite 15)

... English

Installation

Power

Powering On/Off the Projector

Powering On the Projector

1. Open the lens cap.

2. Ensure that the power cord and signal cable are securely

connected.ThePowerLEDwillash

Red

3. Turn on the lamp by pressing “Power” button on the control

panel.



And the Power LED will turn

Red

4. Turn on your source (computer, notebook, video player,

etc.). The projector will detect your source automatically.



If the screen displays “Lock” & “Source” icons, it means the

projector locks on this source type and there is no such type of

input signal found.



If the screen displays “No Signal”, please make sure the signal

cables are securely connected.



If you connect multiple sources at the same time, using the

“Source” button on the control panel or direct source key on the

remote control to switch between inputs.



Turn on the

projectorrstand

then the signal

sources.



The lens cap must

be open then turn

on the projector.



If the projection lens cap is not opened when a projector is powered

on, users will hear a continuous two-beep sound, and the interval of

each two-beep warning message is about 3 seconds.



The projector will not be turned on and automatically gone to a stand-

by mode if the lens cap is still closed after two-beep sound keeps

warning for 5 times.



If the projection lens cap is accidentally closed while the projector

is running, users will hear the same beep and the projector will

automatically go to a stand-by mode if the lens cap is still not opened

after 5 times of warning message.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Acer PD726 Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Acer PD726