Acer AT350 F1 Bedienungsanleitung Seite 76

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 184
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 75
3 System upgrades
64
Installing an expansion card
I/O interface
The AT350 F1 has six PCI bus slots with separate bus segments, namely:
Two PCI Express
®
2.0 x8 in x16 (slots 4 and 6)
Two PCI Express
®
2.0 x4 in x8 (slots 2 and 3)
One PCI Express
®
1.0 x4 in x8 (slot 5)
One PCI Express
®
2.0 x8 (slot 0 - Flex IO)
Installing a SAS card
1 Observe the pre-installation instructions on page 26.
2 Remove the side panel described on page 28.
3 If necessary, remove any cables that prevent access to the PCI slot.
4 Locate an empty expansion slot that is compatible with the
specification of the card you intend to install.
5 Unclip the restraining latch (1) and open in the direction (2) shown
below .
6 Remove the screw holding the slot in place (3).
7 Slide out the slot shield (4).
Seitenansicht 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 183 184

Kommentare zu diesen Handbüchern

Keine Kommentare