Acer AT350 F1 Bedienungsanleitung PDF herunterladen (Seite 123)

111

Specific problems and corrective

actions

Listed below are specific problems that may arise during the use of

your server and their possible solutions.

Power indicator does not light.

Do the following:

• Make sure the power supply module is properly installed.

• Make sure the power cord is connected correctly.

• Make sure that the wall outlet has power. Test it by plugging in

another device.

• Make sure the power indicator on the front panel is lit up.

• Remove all add-in cards and see if the system boots.

If reboot is successful, install the cards back in one at a time with a

reboot between each addition to determine if one of them is

causing the problem.

• Make sure that you have properly installed system compliant

memory modules, and that they are populated according to the

system guidelines.

• Make sure that you have installed system compliant processors,

and that they are populated according to the system guidelines.

HDD activity indicator does not light.

Do the following:

• Make sure the drive is not disabled in the BIOS Setup Utility.

• Make sure the drive is compatible

• Make sure you have not exceeded the power budget for the

server.

• Check that relevant switches and jumpers on the hard drive and on

the backplane board are set correctly.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 183 184

Keine Kommentare

Acer AT350 F1 Bedienungsanleitung Seite 123