Acer PCI Disk Array Controller Drivers 08P4100 Bedienungsanleitung PDF herunterladen (Seite 23)

NetWare

Manual No. 775079 2-9

1. The appropriate drivers should be loaded before trying to access the

non-disk devices.

2. Load the following drivers to use a CD-ROM under NetWare 5.0

(cdrom is supplied by Novell):

☛ Note

mdac.ham and scsicd.cdm are usually loaded in the

startup.ncf file.

: load mdac.ham

: load scsicd.cdm

: load cdrom

After the CD-ROM is mounted, the volume on the CD-ROM can be

mapped from any workstation and accessed.

Installing the Mylex Disk Array Controller into an Existing

NetWare 5.0 System

If NetWare 5.0 is already installed and you wish to add a Mylex Disk Array

Controller later, the controller will be a secondary (non-bootable) controller.

After installing the controller hardware and configuring a disk array, follow

the procedure below to add the necessary controller drivers.

1. Copy NWASPI.CDM (for GAM support).

• Copy C:\NWSERVER\DRIVERS\NWASPI.CDM to the directory

named, C:\NWSERVER.

• In the C:\NWSERVER\STARTUP.NCF file add LOAD

NWASPI.CDM with the other LOAD XXXX.CDM

2. With NetWare Server 5.0 loaded and running, load the NetWare

program by typing the following at the console prompt:

: load nwconfig

and press <Enter>.

3. Choose “Driver Options” in the Installation Options menu.

4. Choose “Configure disk and storage device drivers” in the Driver

Options menu.

5. Choose “Select an additional driver” in the Additional Driver Actions

menu.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

Keine Kommentare

Acer PCI Disk Array Controller Drivers 08P4100 Bedienungsanleitung Seite 23