Acer Altos R700 Series Bedienungsanleitung PDF herunterladen (Seite 29)

You can use the FRU/SDR Load Utility (see “FRU/SDR Load Utility

Description” on page 76) to initialize or update the FRU and SDR

information. Acer server boards are shipped from the factory with

some sensors disabled, because the actual configuration of the chassis

is only determined when the user completes the system configuration.

Chassis-specific information in the FRU, such as chassis part number, is

also absent. For these reasons, it is important to run the FRU/SDR Load

Utility as part of the system setup process. You should also run the FRU/

SDR Load Utility whenever you change the number of fans, processors,

or power supplies in the server.

System Event Log

The BMC manages a system event log (SEL), where it records significant

or critical system events. Such events include temperatures and events.

The BIOS, software, and other devices can also log events by sending

messages to the BMC. The SEL is stored in nonvolatile storage.

You can view the current contents of the SEL by using the System Setup

Utility (see “Viewing the System Event Log” on page 63).

Platform Event Management

Events can trigger alerts and other actions by the BMC. The server is

configured with the following set of standard events:

• Temperature sensor out of range

• Voltage sensor out of range

• Fan failure

• Chassis intrusion

• Power supply fault

• BIOS uncorrectable ECC error

• BIOS POST error

• Processor fault resilient booting (FRB) failure

• Fatal nonmaskable interrupt (NMI) from a source other than the

front panel switch

• Watchdog timer reset, power down, or power cycle

• System restart (reboot)

Alerts can take either of these forms:

BS811.f/cppl!!Qbhf!2:!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 134 135

Keine Kommentare

Acer Altos R700 Series Bedienungsanleitung Seite 29