Acer Altos R700 Series Bedienungsanleitung PDF herunterladen (Seite 77)

Saving and Restoring the System Configuration

Using the SSU, you can save the following configuration information

to a file:

• Platform type, BIOS revision, and firmware revision

• CMOS settings

• Extended system configuration data (ESCD)

• Settings for the emergency management port (EMP), platform

event paging (PEP), and BMC LAN alerts

Data is saved from all sources. There is no way to choose only certain

pieces of configuration data to save. You can also restore the

information from a saved configuration file.

Note: BIOS passwords are stored in the file. Restoring a

configuration can change passwords on a server. EMP and LAN

passwords are not stored in the file.

Saving a Configuration

To save the system configuration:

1 From the SSU Main window, choose Config Save/Restore.

(Configuration Save/Restore is available only in Expert mode.)

2 Click Save To File and specify a filename and location.

Restoring a Configuration

To restore the system configuration from a file:

1 From the SSU Main window, choose Config Save/Restore.

(Configuration Save/Restore is available only in Expert mode.)

2. Click Restore from File and specify a filename and location.

The CSR reads the platform type, BIOS revision, and firmware

revision from the file and compares that information with the

same information retrieved from the server. If the two do not

match, an error message is displayed and the restore operation

aborts. If they do match, the CSR restores the configuration data

to the server. It prompts you to reboot the server for the new

settings to take effect.

BS811.f/cppl!!Qbhf!78!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 134 135

Keine Kommentare

Acer Altos R700 Series Bedienungsanleitung Seite 77