Acer Network Device Altos R520 Bedienungsanleitung PDF herunterladen (Seite 123)

113

To set a Administrator/User password

1 Use the up/down keys to highlight a password parameter (Set

Administrator Password or Set User Password) then press Enter.

A password box will appear.

2 Type a password then press Enter.

The password may consist of up to seven alphanumeric characters

(A-Z, a-z, 0-9).

3 Retype the password to verify the first entry then press Enter

again.

After setting the password, the system automatically sets the

chosen password parameter to Installed.

To change the Administrator/User password

1 Use the up/down keys to highlight either change password

parameters (Change Administrator Password or Change User

Password) then press Enter.

2 Type the original password then press Enter.

3 Type a new password then press Enter.

4 Retype the password to verify the first entry then press Enter

again.

To remove the User password

1 Use the up/down keys to highlight the Clear User Password

parameter then press Enter.

2 Enter the current password then press Enter.

3Press Enter twice without entering anything in the new and

confirm password fields.

After doing this, the system automatically sets the User password

parameter to Not Installed.

Front Panel

Lockout

When Enabled, the front panel power

and reset buttons will be locked. The

power and reset operation must be

controlled via system management

interface.

Disabled

Enabled

Parameter Description Option

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 183 184

Keine Kommentare

Acer Network Device Altos R520 Bedienungsanleitung Seite 123