Acer AB460 F1 Bedienungsanleitung PDF herunterladen (Seite 169)

100

101

149

KVM Connector

Alternatively, you may connect a KVM cable (CBL-0218L, with a

keyboard/video/mouse attached) to the KVM connector (#7) of the

blade you wish to access. To switch to another blade, disconnect the

cable then reconnect it to the new blade.

See the Acer Smart Blade Console on page 28 for further details on

using the KVM function remotely.

Front Panel LED Indicators

Blade module LEDs are described below in the following table.

LED State Description

Power LED Green Power On

Amber Standby

Red

Power Failure

1In the event of a power failure, the 3+1 Redundant Power Supply (if included

in your system's configuration) picks up the system load to provide uninter-

rupted operation. The failed power supply should be replaced with a new one

as soon as possible.

KVM/ID

LED (Blue)

Steady On Indicates that KVM has been initialized on this

blade module

Flashing Serves as a ID indicator (the ID function is activated

with a management program)

Network

LED

(Green)

Flashing Flashes on and off to indicate traffic (Tx and Rx

data) on the LAN connection to this blade module.

System

Fault LED

(Red)

Steady On This LED illuminates red when a fatal error occurs.

This may be the result of a memory error, a VGA

error or any other fatal error that prevents the

operating system from booting up.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 617 618

Kommentare zu diesen Handbüchern

Keine Kommentare

Acer AB460 F1 Bedienungsanleitung Seite 169

Kommentare zu diesen Handbüchern