Acer AB460 F1 Bedienungsanleitung PDF herunterladen (Seite 568)

100

101

4 Networking Switch Modules

548

Note: The 10GbE module also requires the same double-wide bay

as the InfiniBand switch module and may be installed instead of

the InfiniBand switch module in your blade enclosure system. Use

the same instructions below for installing either the pass-through

module or the InfiniBand switch module.

Installing the Module

1. Remove the dummy cover from the bay you want to place the

module in.

2. Place the module's release handle in the open position.

3. Slide the module into the module bay until it stops.

4. Push the release handle to the closed position.

After the module has been installed and the handle locked, it will

power on after a short delay and a POST test will run to verify it is

working properly.

Removing the Module

1. Pull out the release handle to the open position.

2. Pull the module out of the bay.

3. Replace immediately with another module or with a dummy

module cover to maintain airflow integrity.

Acer 4X QDR InfiniBand Switch Module

Figure 4-224. InfiniBand Switch Module

RESET

NA / NA 1 / 2 3 / 4 5 / 6 7 / 8 9 / 10 11 / 12 13 / 14 15 / 16

CMM

1 2 ... 563 564 565 566 567 568 569 570 571 572 573 ... 617 618

Kommentare zu diesen Handbüchern

Keine Kommentare

Acer AB460 F1 Bedienungsanleitung Seite 568

Kommentare zu diesen Handbüchern