Acer Network Device Altos R520 Bedienungsanleitung PDF herunterladen (Seite 143)

133

Server boot does not complete POST

Do the following:

• Make sure the CPU is properly seated.

• Check the BIOS release notes to ensure the BIOS installed on the

platform supports the stepping and the family of processors

currently installed.

Server does not recognize all of the processors installed

Do the following:

• Make sure the CPU is properly seated.

• Make sure the CPU complies with the system requirements.

• Make sure the CPU is populated according to the system

requirements.

• Remove and reseat the CPU.

HDD activity indicator does not light.

Do the following:

• Make sure the drive is not disabled in the BIOS setup utility.

• Make sure the drive is compatible.

• Make sure you have not exceeded the power budget for the

server.

ODD (optical disk drive) activity indicator does not light.

Do the following:

• Make sure the ODD and plastic guide are properly connected. See

page 54 for detailed installation instructions.

• Check that relevant switches and jumpers on the drive are set

correctly.

• Check that drive is properly configured.

• Check that onboard IDE controller is enabled in the BIOS setup.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 183 184

Keine Kommentare

Acer Network Device Altos R520 Bedienungsanleitung Seite 143