Acer SmartRAID V Bedienungsanleitung PDF herunterladen (Seite 101)

5-17

Software Installation

Novell NetWare

You must follow the procedures in the following sections to installing a

SmartRAID VI controller for Novell NetWare, especially as a booting

controller. There are specific steps that must be completed to ensure that

NetWare will recognize the DPT controller and any attached devices.

The DPT diskette for NetWare contains the device drivers you need to

install a DPT controller for NetWare 4.2 and 5.0. The diskette also contains

additional modules that allow you to monitor and configure a NetWare

server using Storage Manager on a remote client workstation.

If you are using NetWare 4.11, you must download the installation files

from the DPT Technical Support web site.

NOTE The I2O drivers in the following Novell Support Packs or

driver kits will result in unexpected behavior of the

SmartRAID VI controller or disk arrays:

I2ODRV3

NetWare 5 Support Pack 2

NetWare 5 Support Pack 2A

If any of these Support Packs or updates are applied, use the

Novell install procedure to update the drivers with the files

from your DPT NetWare diskette.

After you have installed the I

O drivers you can now use the normal

NetWare procedures for modifying disk partitions, hot fixes, or volume

maintenance.

You can use SMOR to create or modify disk arrays or add Hot Spare

drives. If you install remote communication support for Storage Manager,

you can use Storage Manager from a client workstation to manage the

storage subsystem.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 255 256

Keine Kommentare

Acer SmartRAID V Bedienungsanleitung Seite 101