Acer SmartRAID V Bedienungsanleitung PDF herunterladen (Seite 135)

6-23

Storage Manager

During the drive selection process some drives might be displayed

in a blue color. This indicates that these drives cannot be included

in the array unless you change the configuration. You must either

select more drives for the array or remove one or more drives

from the array. See the introduction to the Array Groups section

for rules regarding the number of drives that can be included in

arrays.

4. When you finish selecting the drives to be included in the new Array

Group, click Done.

The icon for the Array Group will appear with a black flag until you

start the build process by saving your changes.

5. When you are finished creating arrays, exit Storage Manager.

You will be prompted to save the configuration changes. If you save

the configuration, the build operation will start automatically. If you

have created multiple arrays, they are built one at a time in the

order they were created.

You can also start the build without exiting Storage Manager by

selecting File–Set System Configuration.

NOTE: For large redundant arrays, this process can take several

hours to complete. You can exit Storage Manager and perform

other activities on the system while the build continues. The

arrays being built can be accessed during the build as non-

redundant arrays. The arrays will be redundant when the

build is complete.

6. RAID 1 arrays are created by copying the data on one drive of the

mirrored pair to the other. If you have specified a RAID 1 array, you

are prompted to select the direction of the copy.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 255 256

Keine Kommentare

Acer SmartRAID V Bedienungsanleitung Seite 135